Viusite Mod Removal and Replacement with Vacuum

Instructions for Mod Removal and Replacement Using a Vacuum

1. Identify the Defective Mod
   • Inspect the panel to determine which mod is defective.
   • Mark the defective mod with tape for easy identification.
   • Note: The panel is divided into four separate mods, indicated by white lines.
2. Prepare for Removal
   • Use a vacuum specifically designed for mod removal.
   • Place the vacuum directly on the front of the panel over the defective mod.
3. Remove the Mod
   • Turn the vacuum on and apply even pressure while removing the mod.
   • Be aware that the mod is held in place by magnetic tabs on both the panel and the mod itself.
4. Replace the Mod
   • Align the pins on the replacement mod with the hub on the panel.
   • Use the vacuum to carefully place the new mod into position.
   • Ensure the mod is fully set and securely in place.
5. Final Check
   • Verify that the replacement mod is properly aligned and seated.

‍

‍

Urgent? reach out to our service team

+1 (515) 349-7708

‍